Under development

Vetern control levers 7/8 bar 2 lever carb and 1 lever advance

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 14:18:02 +0100

Yes we are producing them again not from a bronze casting but from solid steel CNC machine to the original shape. the two lever type will be around the £115.00 mark and the 1 lever will be £95.00 mark . they should be off the cnc by end of June.see the photo as to how they look now. All finished June 2007 and selling like hot cakes!!

Petrol tanks

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 14:17:25 +0100

Yes we even do tanks and the petrol tank fittings.We have fuel cap in stock now plus most fittings for model H and 1912 to 14 , plus Model P 1 3/4 caps in stock.we have all the drawing for the early model to make them as required.We have made tanks for 1908,1909,1912,1914, Model h and Ricardo so far for around the £550 TO £650 RANGE FOR THE ABOVE MODEL all tinware finished with fittings ready to paint.

Front brakes

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 14:17:03 +0100

Yes we even make the front stirrup brakes for all veterans and other Triumphs for around the £170 marks. Wait and we will have photo soon of most models we have most models in stock other made to order allow 3 months to be hand made.

Brooks seat B170 and early 1912 to 1914 seats i think thay are B180

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 14:16:30 +0100

Yes we have had many enquires. We are going to make brooks seats. I am lucky that my factory is next to brooks in brum. I have been in their and theirs not much left for the old bikes. So we have an original b170 and a b180? Seat to copy from the frames have been laser cut now. The fasteners have been machined and the four types of springs are being wound. Seat pan dies have been made and have stamped 10 pans so far. the only snag is the seat clamp its expensive to make so if you know who got the drawings or where don dunville use to get he’s seat clamp made give us a bell or if you can make them or know some one that will help us to help you!!! ready end of June 08 i hope . see the new B100 leather tops we have had made now for early veterans.

Brooks metal tool boxes

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 14:16:14 +0100

Yes, even the tools boxes to fit late veteran 1914 and model H are on the go 20 sets are being made. Boxes have been bent and leather work is being sourced ready July 08

Web site all up and running

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 14:15:25 +0100

Web site all up and running 21.1.07

Web site now finished and you can submit your order now and pay by pay-pal.

All parts now in or on order all parts should be in by June.

we have order £5000 of turned parts now to replace most fastener on 1908 to 1914 bikes and junior models. (finished)

Link belt is on it way 100meters of 3/4 ,7/8 and 1 inch.(finished)

Plug lead and clips.(finished)

Main bearings.(finished)

Free wheel clutches are getting made now.(finished)

Brooks seat are on their way we are making b 130 and b170. around Aug 07.

Tool box on their way 20 sets are getting made. around Aug 07

front and rear hubs for 1908 to 1914 10 sets of both.(finished)

Front head race bearings are made.(finished)

around 20 different casting are being cast frame lugs. around Aug 07

timing covers. some finished rest Aug 07

exhaust boxes. some finished rest Aug 07

keep watch this site they will be up their soon !!!! or other wise ask us to make the other bits and if their is enough en-quires we will make them too!!!

1911 to 1914 Triumph Barrels

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 14:02:19 +0100

Yes we are making new barrels

So far we have had the barrel turned into a drawing.

It is now at the pattern makers having the pattern made .

hopefully first barrels should be cast buy june 08 and be machined shortly after then.

we have fixed the cracking problems by increasing some on the wall thickness where they cracked. Keep watching we will post more soon and photos

email us now to get on the waiting list. for a new barrel . we are only make small run of 5 to 10 at a time . we all ready have 3 on the list

parts@veterantriumph.co.uk

1913/14,Junior and Model H oval wire front fork springs

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 13:58:59 +0100

1913/14, Junior and Model H oval wire Front Fork Springs

Yes, we are even remaking the front fork springs.

The wire is getting rolled at the moment, will take 16 weeks to get made.

There is a minimum quantity to order- like most things, 100kg of wire had to be made.

We are making a batch of 50 springs, hopefully 1 new spring with the two fasteners will sell for around the £110 mark - that's better than what they sell a second hand one for on eBay!

We can have most springs made - just ask us or send a sample.

24.03.07 First batch has been made now and I have seen them -they should be with us by mid April.

They are finished now and on the web site!

Veteran pedal gear

VETERAN TRIUMPH SPARES — Sat, 02 Jun 2007 13:40:59 +0100

Yes we will be making the pedal gear for all early veterans . You can see the sprocket up on our site . The pedal and cranks will be finished soon .ask us for your requirements today and we will quote you or put a set aside when finished as they will only be made in small batches.

Back To Veteran Triumph Spares

VETERAN TRIUMPH SPARES — Sat, 30 Dec 2006 07:16:47 +0000